- 深圳市科圳威电子有限公司
11年
| Part number ID | 536300-02 |
| Product version | Angle encoder with integral bearing |
| Name | ECN |
| Model | 225 |
| Measuring method | absolute (singleturn) |
| Interface | EnDat 2.2 |
| System accuracy | ± 10 " |
| Mechanical device version | Hollow shaft with mounted stator coupling |
| Flange version | Flange with 76 mm width across flats, 72 mm bearing hole |
| Ordering designation | EnDat 02 |
| Positions per revolution | (25 Bit) |
| Electrical permissible speed | ≤ 3000 1/min |
| Internal clock frequency | ≤ 2 MHz |
| Calculation time tcal | 5 μs |
| Incremental signals | 1 Vpp |
| Output signals per revolution | 2048 |
| Cutoff frequency (-3 dB) | ≥ 200 kHz |
| Power supply | 3,6 V ... 5,25 V |
| Total current without load | ≤ 200 mA |
| Electrical connection | Coupling, male 17-pin |
| Cable length | 1 m |
| Connecting direction | Cable outlet for axial and radial use |
| Cable type | PUR Ø 6.0 mm |
| Permissible cable length | ≤ 150 m |
| Shaft type | Hollow through shaft |
| Shaft diameter | 50 mm |
| Mechanical permissible speed | ≤ 3000 1/min |
| Starting torque at 20°C | ≤ 0.15 Nm |
| Moment of inertia of the rotor | 0.000215 kgm2 |
| Natural frequency | ≥ 1000 Hz |
| Permissible axial motion of measured shaft | ± 0.1 mm |
| Vibration 55 Hz to 2000 Hz (EN 60068-2-6) | ≤ 100 m/s2 |
| Shock 6 ms (EN 60068-2-27) | ≤ 1000 m/s2 |
| Maximum operating temperature | ≤ +70 °C |
| Min. operating temperature (moving cable) | -10 °C |
| Min. operating temperature (stationary cable) | -20 °C |
| Degree of protection | IP 64 (EN 60529) |
| Mass |
0.8 kg |
询价
